Sub 10 active subwoofer 10" 400 Watt

SUB 10  Standardversion Weiss Varnex Klavierlack 
Aktiver Subwoofer mit 10" Chassis . 108dB/SPL
400 Watt Endstufe eingebaut. 19 Hz-90 Hz

 

SUB 10 is a professional active studio subwoofer, designed for accurate sound realization.

SUB 10 is a professional active studio subwoofer equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.

SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.

This subwoofer is suitable for small/mid-sized:

  • recording studios,
  • broadcasting studios,
  • TV studios,
  • multimedia studios,
  • post production facilities,
  • mastering,
  • digital workstations,
  • home recording studios,
  • audio monitoring systems of the highest quality.

 

Technical specifications

Subwoofer

Type Active – Class D power amplifier Hypex: 400 W @ 4Ω
Dimensions Height x Width x Depth
39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75"
Free Field Frequency Response ±2.5 dB: 19-90 Hz
SPL in Free Field @ 1m RMS: 108 dB (single subwoofer)
Peak: 116 dB (pair of subwoofers)
Weight 24 kg / 53 lbs

Calibrated Controls

Input Sensitivity Switch / VOLUME (8 positions) -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB
Input Sensitivity Switch / VOLUME (3 positions) -20dB, -10dB, 0dB
Low-pass filter Switch CUT OFF 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz
Filters By-Pass Switch UNFILTERED (LFE) Position down: filters ON
Position up: filters OFF
PHASE Switch 0 degrees, 180 degrees
STAND-BY Switch Position down: active STAND-BY
Position up: continuous mode (Stand-by OFF)

Loudspeaker

Subbass Loudspeaker Ø 29 cm
Diaphragm: cellulose, surround: rubber

Amplifiers

Subbass Loudspeaker Power Amplifier 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω)
THD distortions Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2
Max 0.04% 20Hz<f<20kHz, Pout = 1W

Inputs, Outputs

INPUT right (R) and left (L) Two types (common socket Combo):
- XLR symmetrical (balanced)
- TRS symmetrical (balanced) "6.3 mm"
and RCA nonsymmetrical
Input impedance 10 kΩ
„Loop Through” Output XLR symmetrical, Output impedance 100 Ω

Protections

Subbass Loudspeaker Protection Pop-free start and stop control
Power Amplifiers Protections Overcurrent protection
Power Amplifiers Protections Overvoltage protection




 
QR-Code